International publications & communications

1. Ahmed Hamida BOUDINAR, Mohamed KHODJA, Azeddine BENDIABDELLAH,  Noureddine BENOUZZA,“Diagnosis Of Stator İnter-Turn Fault And Supply Voltage Unbalance Using Phase-Angle And Magnitude Of The Line Currents“, CEIT 2018, 6th International Conference on Control Engineering & Information Technology, Istanbul, Turkey, 25th to 27th October 2018

2. A. Bendiabdellah, B. Cherif “Diagnosis of an inverter by Clark transform technique based on neural network“, CEIT 2018, 6th International Conference on Control Engineering & Information Technology, Istanbul, Turkey, 25th to 27th October 2018

3. Benouzza Noureddine, Boudinar Ahmed Hamida, Bendiabdellah Azzeddine, “Slot Harmonic Frequency Detection As A Technique To İmprove Stator Current Spectrum Approach For Eccentricity Fault Diagnosis“, CEIT 2018, 6th International Conference on Control Engineering & Information Technology, Istanbul, Turkey, 25th to 27th October 2018

4. Laribi Souad, Bendiabdellah Azeddine, Boualem Boukezata, “Emploi de la Technique Neuro Floue dans le Diagnostic des Défauts Rotoriques de la Machine Asynchrone à Cage d’Ecureuil“, International Conference on industrials Metrology & Maintenance (ICIMM’2018),  Setif, Oct 2018

5. Laribi Souad, Bendiabdellah Azeddine, Cherif Bilal Djamal Eddine, Boualem Boukezata, Meradi Samir, Mihoub Youcef, “Induction machine rotor and stator faults detection by applying the DTW and N-F network“, 2018 IEEE International Conference on Industrial Technology (ICIT), February 2018, DOI: 10.1109/ICIT.2018.8352216

6. Cherif Bilal Djamal Eddine, Bendiabdellah Azeddine, Bendjebbar Mokhtar, “Detection of a two-level inverter open-circuit fault using the discrete wavelet transforms technique“, 2018 IEEE International Conference on Industrial Technology (ICIT), February 2018, DOI: 10.1109/ICIT.2018.8352206

7. Bendiabdellah Azeddine, Cherif Bilal Djamal Eddine, “A proposed voltage technique for inverter open fault-circuit detection based on SVM strategy“, 2017 IEEE 12th International Conference on Power Electronics and Drive Systems (PEDS), December 2017, pp 8-13, Honolulu USA, DOI: 10.1109/PEDS.2017.8289100

8. Cherif Bilal Djamal Eddine,  Bendiabdellah Azeddine, Bendjebbar Mokhtar, Benouzza Nouredine, Amine Mohamed Khelif, “Detection of Open-Circuit Fault in a Three-Phase Voltage Inverter Fed Induction MotorReview on external and internal faults of an association inverter-motor and their impact on the motor operation“, 2017 International Conference on Green Energy Conversion Systems (GECS), March 2017, DOI: 10.1109/GECS.2017.8066188

9. Cherif Bilal Djamal Eddine, Bendiabdellah Azeddine, Amine Mohamed Khelif, Bendjebbar Mokhtar, Benouzzza Nouredine, “The enhancement of park current vectors technique for inverter fault detection“, 2017 6th International Conference on Systems and Control (ICSC),  May 2017, DOI: 10.1109/ICoSC.2017.7958646

10. Cherif Bilal Djamal Eddine, Bendiabdellah Azeddine, Bendjebbar Mokhtar, “An Improvement of the Mean Value of the Currents Technique for Inverter Fault Diagnosis“, ICEECA2017, November 2017, Constantine, Algeria 

11. Fethi A. Aimer, A. H. Boudinar, Mohammed El Amine KHODJA, Benouzza Nouredine, Bendiabdellah Azeddine,  “Monitoring and fault diagnosis of induction motors mechanical faults using a modified Auto-Regressive approach“, ICEECA2017, November 2017, Constantine, Algeria 

12. Cherif Bilal Djamal EddineBendjebbar MokhtarN. Benouzza, Bendiabdellah Azeddine, “A comparative study between two open-circuit fault detection and localization techniques in a three phase inverter fed induction motor“, 2016 8th International Conference on Modelling, Identification and Control (ICMIC), Nov15-17 2016, DOI: 10.1109/ICMIC.2016.7857513, Algiers, Algeria

13. Mohammed El Amine KHODJA, Ahmed Hamida BOUDINAR, Noureddine BENOUZZA, Azeddine BENDIABDELLAH, “Stator Current Modeling of an Induction Motor for Rotor Faults Diagnosis”, IEEE-PEMC2016, September 2016, Varna, Bulgaria, DOI: 10.15866/irecon.v5i6.14494

14. Abdellah CHAOUCH and Azeddine BENDIABDELLAH,”Spectral Analysis Diagnosis of Mixed Eccentricity Fault In Saturated Squirrel Cage Induction Motor”, 3rd International Conference on Automation, Control, Engineering and Computer Science, ACECS-2016, March 20 – 22, 2016 – Hammamet, Tunisia 

15. Cherif Bilal Djamal Eddine, Bendiabdellah Azeddine, Bendjebbar Mokhtar and Benouzza Noureddine,  “Open-circuit fault diagnosis of two-level inverter fed induction motor by the current Park’s vector approach”, CISTEM’16, 2016, Marrakesh, Morocco

16. Karima Merah, Azeddine Bendiabdellah and Ahmed Bouzidane “Bearing faults detection using stator current analysis”, CISTEM’16, 2016, Marrakesh, Morocco

17. Bilal Djamal Eddine Cherif; Mokhtar Bendjebbar; Azeddine Bendiabdellah, Diagnosis of open-circuit fault in a three phase voltage inverter fed induction motor,  4th International Conference on Electrical Engineering (ICEE), pp 1-4, 2015, Boumerdes,  DOI: 10.1109/INTEE.2015.7416736, IEEE Conference Publications 

18. Noureddine Benouzza, Ahmed Hamida Boudinar, Azeddine Bendiabdellah, Mohammed El-amine Khodja, “Slot harmonic frequency detection as a technique to improve stator current spectrum approach for broken rotor bars fault diagnosis”, ACEMP-OPTIM-ELECTROMOTION 2015, Aegean Conference Electrical Machines and Power Electronics, SİDE – TURKEY, 2-4 September 2015 

19. Azeddine Bendiabdellah, Ahmed Hamida Boudinar, Noureddine Benouzza, Mohammed El-amine Khodja, “The enhancements of broken bar fault detection in induction motors”, ACEMP-OPTIM-ELECTROMOTION 2015, Aegean Conference Electrical Machines and Power Electronics, SİDE – TURKEY, 2-4 September 2015 

20. Ahmed Hamida Boudinar, Noureddine Benouzza, Azeddine Bendiabdellah, Mohammed El-amine Khodja, “Induction motor bearing fault analysis using Root-MUSIC method”, ACEMP-OPTIM-ELECTROMOTION 2015, Aegean Conference Electrical Machines and Power Electronics, SİDE – TURKEY, 2-4 September 2015

21. Ameur Fethi Aimer, Ahmed BOUDINAR, Noureddine BENOUZZA, Azeddine BENDIABDELLAH, ‘’Simulation and experimental study of Induction motor rotor broken bars fault diagnosis using stator current spectrogram‘’, CEIT’2015/IEEE, 27-29 May 2015, Tlemcen, Algeria

22. Ahmed BOUDINAR, Noureddine BENOUZZA, Azeddine BENDIABDELLAH, ‘’Induction motor cracked rotor bars fault analysis using an improved Root-MUSIC method‘’, CEIT’2015/IEEE, 27-29 May 2015, Tlemcen, Algeria

23. A.H. Boudinar, N. Benouzza, A. Bendiabdellah, M. Khodja « Improved stator current spectral analysis technique for bearing fault diagnosis », PEMC’2014, Antalya, Turkey

24. A.H. Boudinar, A. Bendiabdellah, N. Benouzza, M. Ferradj « Improved stator current spectral analysis technique for bearing fault diagnosis », PEMC’2014, Antalya, Turkey

25. A.Chaouch, A.Bendiabdellah, M.Chouitek, « The influence of the magneticsaturation on the diagnosis of mixed eccentricity fault squirrel induction motor », CIMGLE, 2013, France 

26. Harir Miloud, Bendiabdellah Azeddine, Chaouch Abdellah, Benouzza Noureddine, »Modelling of Induction Motor Including Skew Effect Using MWFA for Performance Improvement « , ICEET’2013, Penang, Malaysia

27. Chaouch, A.Bendiabdellah,  « Spectral Analysis to Detect Mixed Eccentricity Fault in Saturated Squirrel Cage Induction Motor », IEEE, ISPCC,2013,Indi

28. Harir Miloud, Chaouch Abdellah, Bendiabdellah Azeddine, Benouzza Noureddine, »Modeling and Simulation of Rotor Bar Skew in Induction Motor Based on Modified Winding Function Method », IEEE, EPECS’2013, Turkey

29. Souad Laribi, Gerard Champenois, Azzedine Bendiabdellah, Samir Meradi « Bar Faults Diagnosis of An Indirect Vector ControlSquirrel Cage Induction Motor », The International Conference on Electrical Engineering and Software Applications, IEEE ICEESA, Mars 2013,Tunisia

30. A.Tamer, D. Toumi, A.Bendiabdellah:  » The Detection of Inter-tur stator Fault in Doubly-Fed Induction Generator Based Wind Power System « , 7th International Conf on Electrical Eng, ICEE’12 pp14-19, 8-10 Oct 2012, Batna, Algeria

31. Becheikh.M, Bendiabdellah.A “Numerical Modeling and Analysis of the Electromagnetic Parameters  of an 8/6 Switched Reluctance motor” , 3rd. International Conference on Electrical Engineering Design and Technologies (ICEEDT’0 9), Oct. 31- Nov. 2- 2009, Sousse, Tunisia

32. Ameur Fethi Aimer, Azzedine Bendiabdellah, A.H Boudinar and Cherif Mokhtar « Induction Motor Broken Rotor Bars Detection and Location using the Short Time Fourier Transform », 3rd. International Conference on Electrical Engineering Design and Technologies ICEEDT’0 9, Oct. 31- Nov. 2- 2009, Sousse, Tunisia

33. A.Bendiabdellah, N.Benouzza, D.Toumi: « Cage motor faults detection by speed estimation and spectral current analysis », 3rd IEE International Conference PEMD, 2006, pp 47-51, Dublin, Ireland

34. S. Laribi, A. Bendiabdellah, N. Benouzza, D. Toumi and C. Ogab « L’Emploi de l’Analyse Spectrale de la Puissance Instantanée Statorique pour la Détection des Défauts dans les Moteurs Asynchrones à Cage d’Ecureuil », The 7th international conference on Science and Techniques of Automatic control, December 17-19, 2006 Hammamet, Tunisie.

35. A.Bendiabdellah, G.Bachir: « Comparative study between a matrix converter and a 3 level inverter ». CCECE06, IEEE, 2006, Canada. 

36. N.Benouzza, A.Benyettou, A.Bendiabdellah « An Advanced Park’s Vector Approach For Rotor Cage Diagnosis « , ISCCSP IEEE’04 Publication pp461-46

37. Drif M, N. Benouzza,B.Kraloua,A.Bendiabdellah, J.A. Dente :  » Squirrel Cage Rotor Faults Detection in induction motor utilizing stator Power Spectrum Approach « , PEMD IEE 2002  C.Publication N°487 pp133-138, England

38. Drif, N.Benouzza, B.Kraloua, A.Bendiabdellah and J. A. Dente « Squirrel Cage Rotor Faults Detection by Instantaneous Power Spectrum Approach » SDEMPED’01 IEEE, Gorizia, Sep 1-3, 2001, Italy

39. M.Drif, A.Bendiabdellah, N.Benouzza, J.A.Dente : « Induction Motor Load Effect Diagnostic Utilizing Instantaneous Power Spectrum « ,Power Electronics And Applications, EPE’2001, Graz, August 27-29, 2001, Austria 

40. N.Benouzza, A.Benyettou,A.Bendiabdellah, B.Kraloua,D.Toumi :  » Rotor Cage Fault Diagnosis in Three phase Induction Motors , by Park’s Vector Approach « , Jordanian International, Electrical Electronics Engineering Conference JIEEEC’01, Amman, 2001, Jordan

41. B.Kraloua,A.Bendiabdellah,N.Benouzza, A.Benyettou, D.Toumi :  » Self Tuning Control of a Three Phase Induction Motor Fed By a Voltage Converter « , Jordanian International, Electrical Electronics Engineering Conference JIEEEC’01, Amman, 2001, Jordan 

42. N.Benouzza , M.Drif, A.Bendiabdellah, J.A.Dente: « Broken bars detection in squirrel cage induction motors, by instantaneous power approach « , UPEC’2000, Belfast, Ireland. 

43. Drif, N.Benouzza, A.Bendiabellah, J.A.Dente:  » On-Line Detection of Broken Rotor Bars in Three phase Induction Motors Using Instant Power Spectrum  » Actes CIMASI’02, 23-25 October 2000, Maroc

44. A.Melakhi, A.Bendiabdellah, M. Bouazdia :  » Modélisation et Simulation d’un Ensemble Convertisseur-Moteur Asynchrone Monophasé à Condensateur Permanent « , Actes CIMASI’98 pp 390-395 sur les Mathématiques Appliquées et les Sciences de l’Ingénieur, 27-28-29 Octobre 1998,  Maroc

45. A.Bendiabdellah, A.Bellil : « Lower Frequencies Performance Improvement of Inverter Fed Induction Motor « , UPEC’97, 10-12 Sep 1997, England

46. A.Bendiabdellah, A.Bellil  » Indirect Flux Computation Technique for torque improvement at lower frequencies PWM V/Hz Inverter Fed Induction Motor « ,Power Electronic & Motion Control, PEMC’96, , Sep 2-4, 1996, Hungary

47. A.Bendiabdellah, A.Bellil :  » Simulation of a PWM Inverter Fed Induction Motor Using a Proposed Scheme to Improve the Torque Characteristics in the low Speed range « , Inter, AEGEAN, Conf on Electrical Machines And Power Electronics, 5-7 June 1995 Kusadashi, Turkey 

48. T.Kataoka, Y.Sato, A.Bendiabdellah : « A Novel Volts/Hertz control method for an induction motor to improve the torque characteristics in the low speed range », Power Electronics and Application, EPE’93, Brighton, pp485-488, 1993, England

49. MC cormick M., A.Bendiabdellah, « Design of small single phase induction machines », U.P.E.C  Conference , 1983, England

50. MC cormick M., A.Bendiabdellah, « Automatic Winding Design procedures for split-phase and capacitor-start single phase induction motors », International Conference on Electrical Machines ICEM, pp.322-325,1982, Hungary