Publications

Production scientifique des équipes

  • Lakhache, L .Hammadi , G. Laouni (2023),  « Impact of Sodium Tripolyphosphate on the Rheological Properties of Dams Sediments and Friction Factor during Hydraulic Dredging of Dams ». Advanced Materials Research , Vol. 1177, pp 111-120,Doi:10.4028/p-5r18f6
  • Hassene Daouadji, L. hammadi,  A. Hazzab (2023) «Impact of the Xanthan Gum on Rheological and Mechanical Properties of Slip of Ceramic.  Materials Science Forum  Vol. 1086, pp 49-58
  • Hassene Daouadji, L. hammadi, A. Hazzab (2022) «Viscoelastic behavior of clay and slip used in ceramic »,  Journal of Silicate Based and Composite Materials, Vol. 74, No. 1 , 9–12. p. https://doi.org/10.14382/epitoanyag-jsbcm.2022.2
  • Hathout, L. Hammadi, N. Boudjenane (2022) «Rheological properties of clay-polymer systems: application on water-based drilling mud», Journal of Silicate Based and Composite Materials, Vol. 74, No. 4 p.136–143.. https://doi.org/10.14382/epitoanyag-jsbcm.2022.21
  • F .Rezine, L. Hammadi, M. Bouchekara (2021). « Rheological characterization of the systems clay-polymer-electrolyte. Application to water based drilling fluids. Journal of New Technology and Materials» 11, N°02 p 29-34.
  • Bachir Belmehdi, A. Mellak, Abderrahmane , L. Hammadi (2021) «Effects of poly-sal polymer and barite addition on rheological properties of algerian bentonite»,  Journal of Silicate Based and Composite Materials, Vol. 73, No. 1 p. 2–8. https://doi.org/10.14382/epitoanyag-jsbcm.2021.1
  • Belhadri, A. Mokhtar, A., A. Bengueddach (2021). Adsorption Behavior of Cationic Dye on Bentonite Functionalized With 3-aminopropyltriethoxysilane.. Research Square
  • S. Larbi, A. Khaldi, W. Maherzi, N.E Abriak (2021). Formulation of compressed earth blocks stabilized by glass waste activated with naoh solution. Sustainability, 14(1), 102.
  • Abidi, L. Benamara, A.A.S. Correia, M.I.M Pinto, P.P Cunha (2021). Characterization of dredged sediments of Bouhanifia dam: potential use as a raw material. Arabian Journal of Geosciences, 14, 1-16.
  • Bergane, L. Hammadi (2020) «Impact of organophilic clay on rheological properties of gasoil-based drilling muds», Journal of Petroleum Exploration and Production Technology 10, p. 3533–3540. https://doi.org/10.1007/s13202-020-01008-x
  • Baba Hamed (2020). Optimizing the transport of cuttings with ecological drilling muds: application to directional well.  Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(12), 619.
  • Belhadri, A. Mokhtar, S. Meziani, F. Belkhadem, M. Sassi, A. Bengueddach (2019). Novel low-cost adsorbent based on economically modified bentonite for lead (II) removal from aqueous solutions. Arabian Journal of Geosciences, 12 P.1-13.
  • Z. Lehbab-Boukezzi, L. Boukezzi, L. (2019). Bayesian calibration of HEC-HMS model using two different algorithms. Arabian Journal of Geosciences, 12, 1-11.
  • Haider, M.Z Messaoud-Boureghda, H. Aknouche, A. Akkouche, L. Hammadi, B. Safi, B. (2019). An ecological water-based drilling mud (WBM) with low cost: substitution of polymers by wood wastes. Journal of Petroleum Exploration and Production Technology, 9(1), 307-313.
  • Kreirzti, L. Benamara, NE. Boudjenane (2019). Valorization of dredging sediments of dam BOUHNIFIA in ceramic. Journal of the Australian Ceramic Society, 55, 1081-1089.
  • Benyerou., NE. Boudjenane., M. Belhadri (2019). Étude des caractéristiques thermiques et mécaniques des briques à base de sédiments de dragage portuaire. Matériaux & Techniques, 107(4), 405.
  • D. Benyerou, NE Boudjenane, M. Belhadri, (2019). Influence chimique et minéralogique des sédiments de dragage portuaire dans le cadre de leur valorisation dans la fabrication des briques. Environnement, Ingénierie & Développement.
  • Hammadi, L. (2018). Improving of the mechanical and rheological properties of slip of ceramic. Construction and building materials, 173 p. 118-123.
  • Hammadi, D. Boukhaloua, D. (2018). Modeling of the Cavitation by Bubble around a NACA0009 Profile. International Journal of Mechanical and Mechatronics Engineering, 12(7), 697-700.
  • Zelifi, L. Mourad, L. (2019). Polymeric suspensions viscosity evolution under a constant electric field. Lebanese Science Journal, 20(2), 272.
  • Nedloussi, L. Benamara, K. Ouhba (2019). Utilisation des sédiments d’envasement de barrages comme matières premières locales dans la production des briques. Matériaux & Techniques, 107(3), 301.
  • B.Kara, A. Nemdili (2018). SimHydraulics approach to water hammer problems with the development of new formulas for static pressure diameter coefficient. Forschung im ingenieurwesen-engineering research, 82(2), 107-118.
  • Hammadi, A. Ponton (2017). Rheological investigation of vase of dam: Effects of aging time, shear rate, and temperature. Applied Rheology, 27(1), 21-29.
  • Mekkaoui, M. Belhadri, L. Hammadi, NE. Boudjenane (2017). Rheological behaviour of crude oil: Effect of temperature and seawater. Petroleum Chemistry, 57 p 843-848.
  • A. Kara, A.Khaldi, A.  Ladouani, A. (2017). Prediction of centrifugal pump performance using energy loss analysis. Australian Journal of Mechanical Engineering, 15(3), 210-221.
  • Hadj Djelloul, M. Belhadri, NE. Boudjenane  (2017). Experimental study of using wastewater sludge as a new drag reduction agent. Water Science and Technology, 76(3), 739-746.
  • Moussaoui, L. Hammadi, NE. Boudjenane, RR. Denine (2017). Development of multiple W/O/W emulsions used in pharmaceutical field: effect of additives and insulin on physicochemical and rheological stability of emulsions. Colloid and Polymer Science, 295 p125-133.
  • Baba Hamed (2017). Offshore Drilling: Drilling Fluids and Additives. In Recent Advances in Environmental Science from the Euro-Mediterranean and Surrounding Regions: Proceedings of Euro-Mediterranean Conference for Environmental Integration (EMCEI-1), Tunisia 2017 (pp. 1107-1108). Springer International Publishing.
  • Rezak, A. Khaldi, F. Rahal, (2017). An estimation of evapotranspiration by simple models in the semi arid Mediterranean zone of the North-West of Algeria. International Journal of Hydrology Science and Technology, 7(4), 390-401.
  • D ;Rezini, A. Khaldi, Y. Rahmani, Y. (2016). On the boundary value kirsch’s problem. Journal of Mechanics, 32(1) p. 1-10.
  • Z. Lehbab-Boukezzi, L. Boukezzi, M.  Errih, M. (2016). Uncertainty analysis of HEC-HMS model using the GLUE method for flash flood forecasting of Mekerra watershed, Algeria. Arabian Journal of Geosciences, 9, 1-12.
  • Rezini, A. Khaldi, K.  Bouzid, Y. Rahmani (2015). Analyzing square plate in diagonal compression using Beltrami-Michell methodology. Journal of Theoretical and Applied Mechanics, 53(4), 847-858.
  • Hammadi, NE. Boudjenane, R. Houdjedje, R. Reffis, M. Belhadri, M. (2015). Modeling the time-dependent rheological behavior of clays used in fabrication of ceramic. International Journal of Physical and Mathematical Sciences, 9(7), 1400-1403.
  • Hammadi, NE. Boudjenane, M. Belhadri (2014). Effect of polyethylene oxide (PEO) and shear rate on rheological properties of bentonite clay. Applied Clay Science, 99, 306-311.
  • Hammadi, A. Ponton, M. Belhadri, M. (2013). Temperature effect on shear flow and thixotropic behavior of residual sludge from wastewater treatment plant. Mechanics of Time-Dependent Materials, 17(3), 401-412.
  • I. Bahlouli, K. Bekkour, A. Benchabane, Y. Hemar, A. Nemdili, A. (2013). The effect of temperature on the rheological behavior of polyethylene oxide (PEO) solutions. Applied Rheology, 23(1), 13435.
  • Hammadi, A. Ponton, M. Belhadri, M. (2012). Effects of heat treatment and hydrogen peroxide (H2O2) on the physicochemical and rheological behavior of an activated sludge from a water purification plant. Procedia engineering, 33, 293-302.
  • Baba Hamed .M.Belhadri, M. (2009). Rheological properties of biopolymers drilling fluids. Journal of Petroleum Science and Engineering, 67(3-4), 84-90.
  • Ladouani, A. Nemdili (2009). Influence of Reynolds number on net positive suction head of centrifugal pumps in relation to disc friction losses. Forschung im ingenieurwesen, 73(3), 173-182.

.